SKÅDISment - New Prusament Spool Modular Peg Board (inspired by IKEA SKADIS)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Turn your old (new) prusament spools into a modular and expandable peg board system.
- Ocena
- 0 / 5
- Polubienia
- 63
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 756
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SKÅDISment - New Prusament Spool Modular Peg Board
Turn your out of service old (new) prusament spools into a storage/organization system that grows with your never-ending need for more filament (let's be honest, you can never have too much). This project turns your spools into a modular peg board system inspired by the iconic IKEA SKÅDIS Pegboard.
Parts to Print
SKADISment-wallmount.stl (as many as the discs you plan to use in your configuration)
Auto-orienting the part should lay it flat on the hex patterned face
Enable supports; check support on build plate only, support critical regions only and remove small overhangs
SKADISment-bridgeplate.stl
Should print perfectly without any supports
SKADISment-peg-snap.stl
Print flat, without supports, and 50-75% infill for strength
Additional (optional prints)
SKADISment-screwmount_TOOL.stl
Print flat without supports, using 3-5% infill. (<8g filament used)
PETG works best for the snap fit
Assembly
Disassemble the discs of your prusament spool.
The wall mount piece fits in the centre of the disc and should just snap into place with light pressure.
The discs can be organized in a staggered pattern. The wall mount has a slot that works for 8mm screws heads. The mounting screw should be mounted 210mm apart
You can use the SKADISment-screwmount_TOOL to mark holes to drill into the wall for accurate spacing. The part uses less than 8g of filament and save the hassle of measuring and making sure all the mount points align.
The gaps in between the discs can be filled using the bridge mount.
The system is designed to be infinitely expandable using the parts modularly, it eventually comes down to your need for storage and organization.
Accessories
Feel free to use the SKADISment-peg-snap with any model of your choice to be mounted on the discs. Just combining the part you want to mount and the snap fit part provided in the slicer should work.
*UPDATES*
13.04.2026: Added 2 parts, SKADISment-peg-snap.stl & SKADISment-screwmount_TOOL.stl