Sonos Arch Ultra, Height Elevation Wedges, to change Atmos effects
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The wedges function is to change the angle on the rear of the soundbar to improve the Dolby Atmos Effect
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 111
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have made 3 versions of Height Elevation Wedges for the Sonos Arch Ultra.
Based on Peter Pee YouTube guide on “How to place the Sonos Arc for best Atmos effects”
Link: https://www.youtube.com/watch?v=hu8TLAco2tI
The heights are based on the Quick Guide Chart from the YouTube guide on “How to place the Sonos Arc for best Atmos effects” By Peter Pee
See time stamp 11:49 Quick Guide: Placement Chart for Sonos Arc
Link: https://www.youtube.com/watch?v=hu8TLAco2tI
Info.
This is a remix based on Sonos Arc Ultra Stand by Stefan456789
Link: https://www.printables.com/model/1573458-sonos-arc-ultra-stand
STL files:
Sonos Arc Ultra Angle Wedge One-third of an inch
Sonos Arc Ultra Angle Wedge two-thirds of an inch
Sonos Arc Ultra Angle Wedge 1 Inch
Print settings:
Infill = 15% or more
Support = No
Note:
Yes, I know that the YouTube guide from Peter Pee was made specific for the Sonos Arc and not for the Arc Ultra. But if you want to test it out on the Arc Ultra, here they are ;-)