JK BMS Snap-In Cooling Fan Mount (4010 Fan)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The JK-B1A8S20P BMS controller can get quite warm during operation, especially under higher load. To improve cooling,…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 83
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
The JK-B1A8S20P BMS controller can get quite warm during operation, especially under higher load. To improve cooling, I designed a snap-in fan mount that fits directly into the original JK BMS casing.
This part clips into the existing housing, so no drilling, glue, or modifications are required. Installation takes only a few seconds and can be easily reversed.
The mount is designed for a 4010 fan (40×40×10 mm) and helps provide active airflow over the BMS components, improving thermal performance and potentially increasing reliability during heavy use.
Features Snap-fit design for the JK-B1A8S20P BMS No case modification required Compatible with 4010 cooling fans Quick and simple installation Improves airflow and cooling Hardware
1× 4010 fan (40×40×10 mm) Fan screws (depending on fan model)
Category: Other
