UniFi U7 In-Wall Desk Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
U7 In-Wall Desk Mount STL - featuring cable passthrough, weighted base support, and full port access.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 462
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
U7 In-Wall Desk Mount – Free STL Download
If you’ve been looking for a U7 In-Wall Desk Mount, you may have noticed there isn’t an official option available from Ubiquiti—despite the U7 In-Wall being particularly well-suited to desk setups thanks to its integrated 2.5Gbps passthrough ports and PoE support.
This 3D printed desk mount is designed to provide a clean, stable, and practical solution for using your UniFi access point on a desk instead of mounting it to a wall.
I’m not a CAD or 3D printing expert—this design was created to solve a real-world problem in my own setup. If you have suggestions for improvements, optimisations, or alternative approaches, I’d love to hear them.
🔧 Features
Stable base design with optional added weight
Internal cable routing through the base
Full access to passthrough ports
Clean and minimal desk-friendly design
🖨️ Print & Build Notes
Recommended material: PLA or PETG
Additional hardware: brass heat set inserts, M10 washers
Optional cork base for improved grip
📖 Full build guide + images
For detailed assembly steps, additional photos, and setup guidance, see the full guide here:
👉 https://knowledgehub.hns-berks.co.uk/2026/04/10/unifi-u7-in-wall-desk-mount-free-stl-download/