block puzzle // no suports
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
its a 2 way puzzle😁
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 24
- Wydruki
- 2
- Wyświetlenia
- 111
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Puzzles & Brain-teasers
- Licencja
- Creative Commons — Public Domain
!!READ THE DESCRIPTION CAREFULLY BEFORE YOU START PRINTING IMPORTANT!!
its a 2 way puzzle that u can transforme into a cube or in the frame
more puzzles upcomming!!🥳🥳
i hope you all leave a comment ✨✨
.....................................................................................................................................................................................................................
Printed on a Prusa Mini using PrusaSlicer.
The parts were a bit too tight at first, but setting XY size compensation to -0.1 mm fixed the issue and made everything fit smoothly.
No supports needed. Fun and satisfying puzzle to print and assemble!
.....................................................................................................................................................................................................................
How to adjust XY Size Compensation in PrusaSlicer:
Open your model
Go to Print Settings
Use the search bar and type: XY Size Compensation
The setting will be highlighted in blue when you find it
Set the value to -0.1 mm
This will make the parts slightly smaller, so they fit together more easily.
