1 / 2
1/2 inch Bone Tipping Dies for Spiral or Flat Steel Boning
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
1/2" boning tipping dies for adding the end caps on spiral and flat steel boning.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 48
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution — Noncommercial
I needed a good pair of bone tipping dies for 1/2" boning so I made these.
If you have a similar type of grommet press, these may work for you.
These were made with PLA Professional with 100% infill.