Eufy E21 Baby Monitor Camera Angle Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
1,61 € – 1,97 € netto (bez VAT)
Dla pliku: Eufy E21 Angle Stand_Fine_0.15mm_PLA_MK3S_2h0m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 1,79 € netto (środek widełek).
- Masa podana przez autora
- 18 g
- Czas druku podany przez autora
- 2 godz.
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Small stand for a Eufy E21 Baby Monitor Camera to hold it up at a 45 degree angle for better coverage of a room.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 82
- Wydruki
- 0
- Wyświetlenia
- 262
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
If you have a Eufy E21 baby monitor camera and place it on a flat surface, you'll find the camera can't look all the way down. The camera can pan all the way up at the ceiling, which means you're wasting most of it's range of motion by placing it horizontal.
This stand is designed to solve this problem by raising and tilting the camera down at 45 degrees, giving you full range of view to see what's straight down while keeping plenty of vertical range to still see a full area. The camera attaches to the stand using the two keyholes on its underside and slides into place. Remove the camera from the stand by pushing against the back cutout on the stand to slide it backwards to release.
Print in the same orientation as use, with large flat face down, no supports required. Prints great in PLA, 0.15mm layer height to handle the sloped surfaces cleanly.