Omnistore 5002 front end cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Front end cap for Omnistore 5002 (model up to 2005) awning.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 55
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Front end (if mounted on right of vehicle) cap for Omnistore 5002 awning (the up to 2005 version) as used on motorhomes and caravans. No longer available genuine. This is a much stronger version than any 3d ones I've seen (I bought one from Germany that broke when I installed it).
Print in ASA for best UV resistance. I also did a second version with ribs on it that may be stronger, but not so discrete. I think the rounded one is plenty strong as it's about 3mm thick. Screw mount is much thicker and reinforced.
I'm quite new to designing and printing, so mine did not print very pretty. I used variable layer height to try to make the rounded edge smoother and ironing on top, but that is not as smooth as I'd like.
(The 5002 awning post 2005 had a slightly different cap)