IPod nano 7th Gen Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom Case printed in TPU and PLA
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 23
- Wydruki
- 1
- Wyświetlenia
- 130
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
A handy little case to customize the style of and protect your IPod nano 7th Gen!
Print one CASE, and one of each button, VOLUME and POWER.
Printing
Use slicer to add color/designs to the back of the case. The case should be printed in TPU, PLA case has not been tested. Print the buttons in PLA. The case and buttons shouldn't need supports.
Assembly
To assemble, first slide the buttons into their hold in the case through the inside. Then, angle the IPod and fit it between the 2 sides of the case, aligning and pushing it as far as possible towards the top of the case. Finally, simply snap the bottom of the IPod into the bottom corners of the case!
