1 / 2
Wanhao/Monoprice/MP I3 X-Axis Rear Dragchain Connector — zdjęcie 1
1 / 2

Wanhao/Monoprice/MP I3 X-Axis Rear Dragchain Connector

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/bgXvwdSItxv

Ocena
0 / 5
Polubienia
1
Pobrania
8
Wydruki
0
Wyświetlenia
110
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Share Alike

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/bgXvwdSItxv

Print Settings

Printer Brand:

Wanhao

Printer:

Wanhao Duplicator i3 V2

Rafts:

No

Supports:

No

Resolution:

.2

Infill:

30%

Notes:

Needed a way to mount my cable chain behind the hot-end. I ended up shortening the cable chain by about 5 links and then using M4 bolts through the front to hold this bracket in place. I had to extend the bolt holes to be able to put the nuts on (too little clearance up close to the rail bearing). 14 revs later, here it is:)

Category: 3D Printing

Tagi