Playmobil Rescue Helicopter Tail Rotor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My niece and nephew's Playmobil rescue helicopter had a broken tail rotor. This part is a snap-on direct replacement.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 206
- Wydruki
- 1
- Wyświetlenia
- 1026
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
My niece and nephew's Playmobil rescue helicopter had a broken tail rotor. This part is a snap-on direct replacement. You may have to ream out with an appropriately sized drill bit after printing so it freely spins.
Print instructions
Unassociated tags: tail propeller, tail rotor
Category: Toy & Game Accessories Print Settings
Printer: Prusa i3 MK2
Rafts: No
Supports: No
Resolution: 0.2mm
Infill: 25%
Notes:
I used white ABS- orange or red would be better!
Post-Printing
clean out center hole with drill bit so it spins freely.
How I Designed This
I used Onshape to design the part. I included both .STL and solidworks parts here for remixing.
The onshape file is located here:
https://cad.onshape.com/documents/4bc27824cae85ad62f9ddf4a/w/d1735b698ef50b4bb2530dfc/e/e80ed9c287d0438e974be50a