Star Wars TIE Baron
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Model of a First Order TIE/ba Baron Interceptor at 1:270 scale from Star Wars: Resistance
- Ocena
- 0 / 5
- Polubienia
- 139
- Pobrania
- 704
- Wydruki
- 0
- Wyświetlenia
- 2199
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution
The TIE/ba Baron Interceptor is a starfighter used by the best pilots of the First Order. It appeared in the first Season of Star Wars:Resistance as the starfighter of Major Vonreg. The design is a combination of a TIE Interceptor and a TIE Advanced V1.
This is a model at 1:270 scale. Its 35.6mm long, 26.1mm wide and 22.8mm tall.
For a holder, it is compatible with a small peg, pin and base.
Print Instructions
Printed at 0.1mm layer height. Requires supports on buildplate.
Rotate by -90° along the x-Axis so that the back of the ship points down towards the printbed and the cockpit points up. (This reduces the amount of supports.)
The wing tips can cause stringing.
If you want to support me, you can do so via this link: https://ko-fi.com/printingdaniel#
UPDATE: Slight Rescaling
I've discovered that according to Lego Star Wars: The Skywalker Saga, this ship is 9.6m long and have rescaled the model accordingly. It is now a tiny bit smaller than before. I've also modified the cockpit window so that the individual panes are still visible on the print.