Ford Kuga (Mk3) Mesh Load cover replacement part
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement part for Ford Kuga with the mesh load cover that likes to fall down
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 224
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
I was fed up with the load cover/ cargo cover on my Ford Kuga (mk3) constantly falling from the silly clips that ford supplied, this design rotates the clip part to the top side, so it doesn't constantly fall out.
The clip should be printed with the long straight piece of the clip aligned vertically, I would recommend PET-G to give it change of surviving in the warmth of the car.
The manufacturer clips can be removed with some persuasion, (there are clips on the sides if you are struggling), this then just needs a bit of firm pressure to locate it and you are good to go.