FPV Camera Mount for QAV210 / H210 Quadcopter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted a simple adjustable angle FPV bracket for my Crazepony (Crazypony) H210 and 700TVL FPV camera.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 49
- Wydruki
- 1
- Wyświetlenia
- 777
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
I wanted a simple adjustable angle FPV bracket for my Crazepony (Crazypony) H210 and 700TVL FPV camera. I couldn't find one that I really liked to I put this together. It's intended to be adjustable, simple & lightweight.
I also included the Solidworks 2016 files for remixing.
Print instructions
Category: R/C Vehicles Print Settings
Printer: Snowstock delta
Rafts: No
Supports: No
Resolution: 0.2mm
Infill: 50%
Notes:
Used 3.0mm Verbatim PLA
Post-Printing
Drill & tap appropriate places for M3 thread
Drill appropriate clearance holes for M3 screws
Hardware Needed:
M3 x 14mm SHCS for FPV camera mount
M3 x 25mm SHCS for angle bracket