Garden Hose Siphon Filter Basket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A strainer / filter that allows a common garden hose to be used as a siphon without blockages from leaves, etc.
- Ocena
- 4,833 / 5
- Polubienia
- 173
- Pobrania
- 692
- Wydruki
- 7
- Wyświetlenia
- 5205
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed this to attach to a common garden hose so it could be used to siphon large amounts of water while preventing leaves or other debris creating a blockage in the small hose opening.
In hindsight, I should have printed this in orange or yellow to make it easier to see in murky water. Otherwise it performed perfectly, providing a large area to stop leaves/twigs/etc. from blocking the flow of water and prevent them from interrupting the siphoning of the water.
I printed this without supports, and was able to clean up the small amount of filament that drooped inside where the bridging of the top was less than perfect.
Update 04-18-2022:
Following the excellent suggestion by ejantzer (thank you!) who pointed out that an angled top would be easier to print than the flat top of the original design, I added two versions you can choose from, based on how well your printer handles overhangs.
Print Settings:
Printer
Creality CR-6 SE
Filament
Inland PLA+
Temperatures
HE: 205 / Bed: 60
Resolution
.20 mm
Speed
50 mm/s