BTS7960 / BTS 7960 M3 Mount Standoff
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A standoff for the BTS7690 Driver Board, using slotted M3 nuts with M3 bolts (8mm or greater). No supports required.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 81
- Wydruki
- 0
- Wyświetlenia
- 229
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This is a BTS7960 standoff / mount that prints with slots for hexagonal M3 nuts that can be pushed in post print.
The M3 nut slots are near the top of the standoff, meaning that any M3 bolts greater than 8mm (and less than 40mm) can be used to fasten the BTS7960.
The base of the standoff has four M3 bolt holes.
The build uses basic hexagonal M3 nuts that can be pushed into the slots when oriented with the "narrow" dimension perpendicular to the slot (see pictures).
Prints without supports, but a bit of manual cleanup may be required for the nut slots.