1 / 1
Wet Biscuit (uprgrade 2) 3D printed filing jig to create 0.2 mm flats on a 2 mm brass shaft
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is to be sure to make the flats at the good places on the propeler shaft.
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 79
- Wydruki
- 0
- Wyświetlenia
- 205
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
This is to be sure to make the flats at the good places on the propeler shaft.