1 / 4
End Cap for "DT Swiss Ratchet LN Shimano Microspline"
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a model for the right (cassette side) "End Cap" for the Ratchet LN freehub of DT Swiss
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 73
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
The end cap (Endkappe) is e.g. part of HWYABM00S3765S
Recommended print settings:
Infill: 100%
Support: enabled (on build plate only)
PETG
Layer heigth: 0.1 - 0.2 mm