Proxxon MS 4 Vise Table Clamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clamp for Proxxon MS 4 vise to securely mount it to a table.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 61
- Wydruki
- 0
- Wyświetlenia
- 343
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a clamp for the Proxxon MS 4 vise, designed to securely mount the vise to a table.
For the main clamping screw, I'm using a metal screw and nut instead of a fully printed solution, as it provides better strength and durability.
For best results and strength, I recommend printing with a durable and strong material.
Suggested settings: 5 perimeters, 5 top and bottom layers, at least 20% infill
Bill of material:
1x M16x60 mm screw
1x M16 nut
4x M4x16 mm screws
4x M4 nuts
Compatibility note:
A newer version of the Proxxon MS 4 vise features mounting holes in a slightly different position. While I tried to make this design compatible with both versions, I was only able to test it with the original model. If you own the newer version, I would greatly appreciate any feedback on fit and compatibility.