Cable cover with PG7 - Voron Trident
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model can be called “remix” of the original cable cover for Voron Triden.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 187
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
This model can be called “remix” of the original cable cover for Voron Triden. I've modeled it from 0 to accomodate 2 main modification:
a. PG7 gland for the toolheads CAN board wiring
b. side aperture (same as in the original model) for the cable chain wires and led sticks cable managment.
The top side (with pg7 thread) of the cable cover is 5mm thick, for more thread contact and better mechanical support of the gland.
In general, it is beefier than the original. The geometry of the model is better optimised (in my opinion) for 3D printing
The 3mf profile is set up with Voron recommended printing settings.