Magnetic Chessboard with Sliding Storage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This chessboard can be use with the tiles and pieces I created in the remix of Herman Ohme Magnetic Chess Set.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 174
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This chessboard can be used with the tiles and pieces I created in my remix of the Herman Ohme Magnetic Chess Set. No printing supports are required.
Use super-glue to bond the parts as follows:
Test-fit the parts together before gluing to verify the orientation.
Glue all 4 "Under Box" parts together (pay attention to the orientation).
Glue the "Drawers L Parts" together around the "Under Boxes" to form the U-shape from each two L-shape (note the letters and numbers to ensure the correct orientation). There is an optional slot at each end to place an 8x2 mm magnetic disk.
Glue the "Chess Pieces Storage" inside each box, following the orientation shown in the picture.
Glue the "Bed Under Tiles" to the "Drawers L Parts" to complete the sliding assembly.
Notes:
The "Chess Pieces Storage" is custom-designed for the Herman Ohme chess set remix. If you are using a different chess set, you do not need to print this part.
The "Insert Pins for Drawers and Boxes" and "Tiles Alignment Tool" are optional to print.
Print in PLA to minimize warping in the corners of the boxes.
The original 3D Model file is provided for any future remixes.
Happy printing and playing!