1 / 2
Bed Mount for LDO MIC 6 heated v0 bed on ROOK MK2 — zdjęcie 1
1 / 2

Bed Mount for LDO MIC 6 heated v0 bed on ROOK MK2

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Modified bed frame and standoff bracket to fid MIC6 bed to Rook MK2

Ocena
5 / 5
Polubienia
5
Pobrania
9
Wydruki
1
Wyświetlenia
141
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Modified parts to use the LDO MIC 6 v0 heated bed plate on Rolohaun's Rook MK2.

Rolo Aff link to LDO Bed - https://kb-3d.com/store/v0/993-ldo-mic-6-aluminum-printer-bed-w-polyimide-heater-120mm-1696770192978.html?affp=36954

This includes two parts.  

1) Modified Bed Frame (including the built in supports) with a 6mm hole to let the thermistor that connects to the middle of the plate though. This can be printed in PLA or whatever material you are doing your build with.  Alternatively, drill a 6mm hole centered 55mm back from the center of the front mounting hole.

2) Bed Mount - Standoff bracket to hold the bed up enough that the thermal fuse does not cause a problem.   This should be printed in a heat resistant material since it will be in direct contact with the bed.  I did mine in ASA and the rest of my Rook MK2 is PLA.