The Porta-Punisher (A Multi Color Torture Test)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Mini Porta‑Potty Torture Test for Overhangs, Bridging, Stringing, VFAs, PA Tuning, and Moving Part Accuracy.
- Ocena
- 0 / 5
- Polubienia
- 32
- Pobrania
- 177
- Wydruki
- 0
- Wyświetlenia
- 652
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
The Porta‑Punisher:
The Porta‑Punisher is a compact, functional torture test designed to reveal how well your printer handles real‑world geometry under challenging conditions. This tiny porta‑potty features overhangs, bridges, thin walls, internal cavities, and long vertical surfaces that expose issues with cooling, flow control, and mechanical accuracy.
The hinge mechanism is intentionally tolerance‑sensitive: a successful print allows the door to swing freely and close under its own weight without sticking or needing to be pried open. This makes it an excellent indicator of dimensional accuracy, pressure‑advance tuning, and single-line bridging as the top surface of the door is chamfered.
Inside the potty, overhangs, vents, and small internal features test cooling performance and stringing control. The tall exterior walls highlight Z‑seam consistency, Vertical Fine Artifacts (VFAs), and ringing. Thin wall sections stress extrusion width calibration and pressure‑advance behavior. For (single nozzle) multi‑material printers, the model also exposes color bleed, registration accuracy, and purge efficiency.
IF YOU DOWNLOAD THE STL:
In your slicer be sure to separate the object into parts. Then you may assign the colors of your choosing to each object.
A successful print should have these attributes:
Door swings freely and closes automatically under its own weight
No prying needed to open the door — hinge rotates smoothly
Clean overhangs on the roof and door lip with no drooping
Bridges are flat across the doorway and interior spans
Minimal stringing inside the cabin and around the door gap
Consistent walls with smooth surfaces and minimal VFAs
Z‑seam is clean and doesn’t wander or bulge
Thin walls print evenly with no gaps or over‑extrusion
Color boundaries are sharp with no color bleed (multi‑material)
First layer is solid with no lifting or elephant’s foot
Door handle, vents, and small details are crisp and well‑defined
An unsuccessful print might have these attributes:
Door sticks, binds, or needs to be forced open
Door won’t close on its own (tolerance or elephant’s foot issue)
Sagging overhangs on the roof or door lip
Drooping bridges across the doorway or interior ceiling
Heavy stringing inside the cabin or around the vented area
Visible VFAs, ripples, or inconsistent wall texture
Z‑seam blobs, bumps, or misalignment
Thin walls with gaps, bulges, or inconsistent extrusion
Color bleed or ghosting between materials (single nozzle multi‑material)
Blobs or roughness inside the toilet bowl
Warping or lifting at the base
Small features (vents, handles) appear melted or misshapen
Some Examples:
Stringing Along the Vented Area

Color Bleed Along the Door and Walls (Single nozzle, Multi Color)

Be sure to share your results!