Wanhao/Maker Select Spool Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a better spool holder for my printer as the stock holder could nto fit a 1kg spool of prusament, The spool…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 215
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I needed a better spool holder for my printer as the stock holder could nto fit a 1kg spool of prusament, The spool holder snaps into place on the metal frame and can easily hold a 1 kg spool.
There is a possibility to insert a small rod in the holder if you need to use spools that does not fit the holder, has not been tested.
Print Settings
Printer Brand:
Wanhao
Printer:
Wanhao Duplicator i3 Plus
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.2mm
Infill:
The higher the better
Filament: Generic PLA Your choice
Notes:
I've successfully printed this with a 0.8mm wall thickness and 20% infill, but I suggest printing with higher values for a sturdier holder, as the holder had a tendency to bounce when the extruder tugged on the filament. Latest settings that worked for me were 1.2mm wallthickness and 40% infill.rnrnBUT: if you want to put more weight on it, increase the infill and/or wall thickness
Category: 3D Printer Parts