Hotwheels / matchbox storage locker (reduced filament use)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use the trays from the original referenced model. This version needs glued together. I may upload a solid one as well.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 62
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Public Domain
This is just the shell to be used with the trays from the original model. This version uses significantly less filament by adding holes on all sides and also by eliminating the full shelves. It uses a rail system instead. It is slightly taller, however, as I increased the height slightly to accommodate the added a retaining lip to each shelf that helps keep the trays in. It is angled to assist in insertion and removal of the trays.
Although it had a few mm to spare in my P1S printer, i decided to cut it with a dovetail joint so that it needs to be glued together once printed. I did this to eliminate the more than 100g of filament it would have required just for the supports otherwise.