Character Coaster – Coffee Cow (Moving Legs and head)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fun and functional cow-themed coaster with a playful twist!
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 168
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
A fun and functional cow-themed coaster with a playful twist!
As the coaster is pushed, the legs rotate to create a charming walking motion, bringing your desk or table to life.
Part of the Character Coasters series – collect them all!
Have you seen the Turtle coaster here: https://www.thingiverse.com/thing:7318935
🧩 Parts Included:
Base
Top (twist-lock design)
Head
Option 1: Single-piece head (simpler print)
Option 2: Head with separate eyes and horns for colour contrast
Eyes (x2)
Horns (x1)
Front legs (x2 – identical)
Back legs (x2 – identical)
Hooves (x4 – identical, push-fit)
Tail (x1)
Spots (x6 – glue required)
⚙ Print Settings:
Base & Top: 5–10%+ infill
Head: 15–25% infill
Legs & Tail: 100% infill (for strength and smooth motion)
Layer height: 0.2mm recommended
Walls: 3–5 perimeters
🖨 Printing Instructions:
All parts are oriented for optimal printing
** Top should be printed upside down – no supports required on Elegoo Neptune 4 Pro.
Base requires minimal supports in the centre only
Limbs, head, and tail may benefit from light supports depending on your printer
** If your printer cannot print the 1mm recessed overhangs without supports, then use supports.
🛠 Support Notes:
Use minimal supports only where needed
Tree/organic supports work well for easy removal
Avoid excessive supports on small parts
🔧 Assembly:
Twist and lock the top into the base
Insert front and back legs
Attach the head and tail
Push-fit hooves onto the legs
Glue spots into the recessed areas
🧠 Design Notes:
Top shell includes shallow recesses for spots – designed to print cleanly without supports
Model uses standard tolerances suitable for most printers
If parts feel tight, lightly sand or adjust slicer settings (horizontal expansion)
🎯 Features:
Smooth mechanical leg movement
Easy-to-print modular design
Minimal supports required
Great for desks, coffee tables, or as a gift
🧸 Part of the Series:
This model is part of the growing Character Coasters collection.
Why stop at one?
👉 Collect and print the full set!
☕ Suggested Colour Ideas:
Body: White
Hooves: Black
Eyes: Black
Horns: Natural / cream
Or customise your own!
👍 Final Notes:
Designed to be:
Fun to print
Easy to assemble
Satisfying to use
If you enjoy it, please consider leaving a like or sharing your make!
Safety precautions:
This is a novelty coaster. Exercise caution with very hot liquids due to tipping action.
Contains small parts. Not suitable for very young children.
