Outdoor DHT housing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Housing for using a DHTXX sensor outside, keeping it shaded from the sun and weather. The housing has stacked "roofs"…
- Ocena
- 4 / 5
- Polubienia
- 16
- Pobrania
- 280
- Wydruki
- 1
- Wyświetlenia
- 1270
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- GNU General Public License v2.0
Housing for using a DHTXX sensor outside, keeping it shaded from the sun and weather.
The housing has stacked "roofs" to allow for air to flow through but keeps water and sunlight out. It is a two part design for easy install and modification.
The base plate has a mounting hole for DHT22 and for boards like the BME688.
The mounting hole are spec'd for #2 flat head screws or around 2.5mm flat head screws. Main thing is the head size so it does not interfere with the cover. The sensor can use the same size screws.
A UV resistant filament should be used ideally for any long term use. (PETG, ASA, etc.)
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
200
Infill:
Doesn't matter
Filament:
Doesn't mater PETG, ASA
Notes:
A UV resistant filament should be used ideally for any long term use. (PETG, ASA, etc.)
Category: Electronics