Weather-Tight Container Caps and Couplers for Twist-Locking Prusament Spools
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Create a durable, weather tight containers using the center hub of the new Prusament spool.
- Ocena
- 4 / 5
- Polubienia
- 26
- Pobrania
- 25
- Wydruki
- 1
- Wyświetlenia
- 447
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
These NEW over-engineered Prusament spools are just so versatile! They normally assemble with bayonet-style twist-lock sides that require a 3D printable tool to open.
This over-engineered lid system uses the spool's center hub (plus a couple o-rings) to securely lock valuables in a weather-tight compartment; something that is notoriously difficult for FDM printed containers. I also find my locking mechanism to be particularly satisfying, and find myself fidgeting with the containers pictured in this post; opening and closing them repeatedly.
You can even continue to use or reprogram the spool's OpenPrintTag for any sort of NFC tap & scan application.
End-Cap Print Settings:
Choose if you want a LITE or HEAVY DUTY version. The only difference is the outer hand-feel.
Use PETG or other rigid filament (PLA may warp and loosen over time).
Default 0.2mm layers works great!
No Supports!

NEW: (Optional) Coupler/Extender Print Settings:
(same as above)
LITE and MAX versions available. Only difference is height of outer rim and plastic used.
Enable Supports! - "On build plate only" - "Don't support bridges"

Weather-Resisting With O-Rings (Optional):
If you want water and weather resistance, these lids were designed to take a pair of 5233T352 High-Temperature Silicone O-Rings from McMaster-Carr. They are 60mm ID, 63mm OD, 1.5mm diameter. You must also apply a thin layer of grease (like that which came with your Prusa printer) for smooth operation.
You may be able to use neighboring sizes of o-ring as long as the diameter is roughly 1.5mm.

What about the sides of the spool?
You can make a great pegboard!
Updates:
14 April 2026: Now includes a rugged, weather-tight coupler for longer storage options! It is a bit more bulky than my slim extension ring, and 100% more water proof.