Ringed Tetras
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Puzzle called "Ringed Tetras" from the "No Problem Puzzles" Collection
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 45
- Wydruki
- 1
- Wyświetlenia
- 134
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Puzzles & Brain-teasers
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Ringed Tetras
Pack the eight tetracubes and two rings in the 3x4x4 box through a central hole. An odd 30 moves and rotation are needed. There is only one solution.
Printing Instructions
The box is printed in 2 pieces to have no overhang. The 2 pieces need to be pressed together. Depending on the filament quite a bit force might be required. Print the set of pieces and then you are all ready for puzzling
Difficulty
4 out of 5
The Printable Puzzle Project
The Printable Puzzle Project aims to make available high-quality open-source models of many puzzle designs. All of our models are posted with the generous permission of their designers and are licensed for non-commercial use only. Anyone may print copies for their own personal use, but selling or otherwise monetizing them is not permitted, and puzzle designers retain all rights as copyright holders of their work.
Our puzzles are modeled using the open-source puzzlecad library. The .scad file is included with this model in case you want to modify any of its design parameters; more information on how to do this can be found in the PPP Puzzle Modeling tutorial.
The "No Problem Puzzle Collection" contains many puzzles with complicated boxes that would be too hard to model using open-scad. Additionally the original design files for the boxes have been lost due to a hd-fault. That is why these puzzles only contain scad-files for the pieces.
About The Designers
From November 2020 to April 2023 Theo Geerinck and Symen Hovinga collaborated under the trading name of "No Problem Puzzles" to design and produce their puzzles. Many of their unique packing puzzles introduce fascinating features such as moving or sliding doors and elements. These features and the way they behave always add a playful new dimension to the more familiar exercise of packing shapes. Those puzzles could once be purchased through an online printing service. Alternatively, for those who owned a 3D printer the files could be obtained from Symen.
However, after the tragic loss of Symen, purchases through the ‘No Problem Shop’ was no longer possible. Therefore, Theo decided to publish the designs so that everybody can create 3d-printed copies to be enjoyed for personal use.