Absurdly Well-balanced D4 Health Potion - alternative to tetrahedron, bone dice, two-sided, or Arch'd4
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
When using a health potion or anywhere else you'd use a tetrahedral d4 such as a dagger, use this. # up, easy to read!
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 68
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Miniature Gaming Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
100% infill for best balance and clarity (but if using opaque filament, a different pattern will be fine if balanced).
When printing with 100% infill, I had to use .9 extrusion multiplier or print two at a time to equalize pressure (intentionally create strings via movement) to prevent blobs on the sides, but that may also be helped by drying the filament first, using a better quality filament, tuning flow rate for the specific filament type/reel, or printing at a slower/faster speed.
A brim is recommended for adhesion. Zig-zag, line, or similar infill at least on bottom may help adhesion.
The squares (and cork) can be painted. I retouched the photo to better to fix my errors I made when actually painting them, for demonstrations purposes.
A high frequency color-change filament can look pretty good with this, since painting the fluid part may look too fake (It won't look like glass is around the fluid, except maybe with a thick clear coat like glossy Mod Podge).
I used Amolen Crystal PLA (color-change filament, translucent "green" to natural).
You could sand the bottom more round to further reduce the chance of it landing upright, but to be fair you would have to sand it very symmetrically or spin it sideways when rolling it.
Multi-color version (for MMU or other multi-color 3D printer) has numbers since there is no balance issue due to cutouts being filled with another color of material. It has 8 parts, and you can use the following suggested colors:
Main body: transparent ("natural" PLA may be transparent enough)
Liquid: red or translucent red
Cork: tan or brown
Numbers (1-4): black
bottom logo: black
If you have a 2-color printer such as IDEX, it may look ok with something like:
Transparent: Main body
Translucent red or pastel red (desaturated light red): Liquid, numbers, bottom logo, cork
The models labeled 20mm are recommended. They are the latest version (effectively the same except pattern) and roll nicely (and will probably work better in dice towers than tall, thin ones). Old versions are here just in case you like them.
There are three 20mm versions:
20mm: regular, for 1-color printing.
Multicolor: Logo is internal to help adhesion (transparent liquid not just glass may help show it better).
Multicolor, logo on bottom: Makes logo more visible, but patterns on bottom typically lower bed adhesion.