Extensor grabber (accessory parts - separate extensors kit required)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Extra parts to add to an extensors kit (available from http://www.mathmechs.com) to make an extensor grabber toy.
- Ocena
- 0 / 5
- Polubienia
- 67
- Pobrania
- 300
- Wydruki
- 2
- Wyświetlenia
- 2397
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Extra parts to add to an injection molded extensors kit (available from http://www.mathmechs.com) to make an extensor grabber toy. Designed by Will Segerman and me.
The plunger comes in three parts. The shaft part (with one thumb hole) should be inserted through the square barrel part (with two finger holes), and then the small cross piece glued onto the shaft part. The crosses on the small cross part and the square barrel part should come to meet when the shaft is pulled out as far as possible from the square barrel part. You may need to add a raft under the plunger print since the thumb ring has a very thin contact with the baseplate.
Extensors are protected by US patent 11,702,327.