Wicked edge holder for 2x15 cm plates and stones
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Plates and stones holder for the wicked edge knife sharpener to use cheap 2x15 cm plates
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 47
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Open Community License v1
This is a holder for cheap Chinese 2x15 cm diamond plates and stones for the wicked edge knife sharpener. I used this stoneholder as a template but made the design from scratch. https://www.printables.com/model/307683-edge-pro-to-wicked-edge-stone-holder-adapter Freecad file is included.
Print with 0,15 mm layer height nozzle 0,4 mm, I used PETG. With this settings the holder fits tight around the rods but needs to be lapped to size a bit. Use a skewer or rod with some 400-600 grit sandpaper around it and sand the bottom and top of the hole over the total length. Only a few strokes are necessary.
The 3mf file contains a color change so you can print different holders with different top colors in case you want to play around with this.
Plates and stones can be fitted with strong double sided tape