Worx Screwdriver Spare Cylinder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tired of having only the single cylinder that your Worx power screwdriver came with? You are not alone.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 70
- Wydruki
- 0
- Wyświetlenia
- 407
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- GNU General Public License v2.0
Non Printed Parts:
3x 6mm Cylindrical Magnets
1x Pen Spring
The cylinder works on its own if needed, but is equal in functionality to the original if properly assembled. You need to push the plunger into the center hole of the cylinder, so that the small nipple pushes through the hole. Then, insert half of a pen spring after it, so that the plunger can slide forwards and backwards. Follow this with 2-4 6mm cylindrical magnets, which hold the hex bits in position. Finally, attach the plug with the nipple facing outwards and superglue the plug into position. Let it dry and voila!
Printing:
I used a stock Ender 3 to print the parts out of PLA, using default slicer profiles. Using a raft or a brim can make the plunger and cap not fit properly, so use those with caution.