Prusa Minda\Pinda cable guide v2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is v2 of the previous REMIX of the excellent cable management adapter by clivebradshaw & enganear.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 43
- Wydruki
- 4
- Wyświetlenia
- 443
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is v2 of my previous REMIX of the excellent cable management adapter by clivebradshaw & enganear. Their versions didn't fit my Prusa Mini the way that I would have liked it to, so I decided to do some modifications to their design to fit my printer and saw some suggestions from others and even just prefer this v2 over the others.
- Modified cable guide to fit better by reducing the cable length base to be closer\under the stepper motor.
- Removed 1 set of the internal zip tie cable routing for a cleaner look
- Removed some material from the hex flare to the wings to allow the factory extruder adjustment tension screw to NOT push out the entire assembly in certain circumstances.
I printed this in PLA, and PETG and have been running them for several months without any issues.
I printed this with supports to build plate only for the indentation on the Hex wing. Might be able to do without.