Omnidirectional wardrobe hook - snap on
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Omnidirectional hook for a circular rod. Snaps on and removes easily. Print in place with no support.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 56
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an author's remix of an author's remix https://www.printables.com/model/1684290-omnidirectional-wardrobe-hook-circular-rod allowing easy snap on and removal. Let me know if you need another size/shape in the comments.
You will need
7 g of PETG or PLA
Printing
0.2 mm layer height
3 walls
100% infill
Ignore the slicer mesage about floating regions/overhangs
Post-processing
Gently rotate the parts against each other until they move freely
Making the best of it
As any print-in-place design, this one is quite sensitive to the tolerances. Make sure your filament is dry and your printer is fine tuned.