Hydroponic End Cap - 3" to 1/2" Reduction (Leak-proof Design).
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Reducción 3" a 1/2" para hidroponía. Mantiene nivel de agua constante. Diseño estanco para PETG. Ideal sistemas NFT/DFT.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 131
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
3" to 1/2" reducing plug designed for recirculating hydroponic systems. Its main function is to act as a level barrier, maintaining a constant water level within the tubing to protect the root system from power outages or pump interruptions. Ideal for research and low-cost production.
Printing Recommendations
To ensure watertightness (no leaks) and mechanical strength:
Material: PETG (Recommended for chemical and UV resistance).
Perimeters: 6 loops.
Infill: 50% (Gyroid pattern for greater structural support).
Top/Bottom Layers: Minimum of 4 layers.
First Layer Speed: 20 mm/s to ensure complete adhesion.
Layer Height: 0.2 mm (Ideal balance between sealing and time).
Post-processing: It is recommended to use Teflon tape on the 1/2" thread for a perfect airtight seal.