Harrier / Seagull Printable Rambase
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printable replacement piece for Worker Seagull/Harrier Foam Blasters
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 42
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
My ram pusher fell out of my harrier blaster, and after making the base worse off then fixing afterwards, I was left with a unusable rambase.
I couldn't find any other parts to replace this from Worker anywhere, and while it is not meant to be as nice and solid as the CNC'd one from Worker, it has at least left me with a 99.99% Harrier with no drops in FPS, or any other modifications required.
One Model with the ability to add a M3x6x5 threaded insert.
This model is tight tight tight to get the ramcore in, a few gentle love taps with a rubber mallet, or a clamp was all I needed to get my base completed.
Print this with that strongest stuff you can, PETG at the bare minimum.
10 Walls or Greater
100% Infill
Use Snug Support to leave your O-ring channel nice.