Kreuzverbinder für PV Solar Photovoltaik Unterkonstruktion cross connector for pv solar photovoltaic mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Kreuzverbinder für PV Solar Photovoltaik Unterkonstruktion cross connector for pv solar photovoltaic mount
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 27
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Kreuzverbinder für die Montage der PV Solar Photovoltaik Unterkonstruktion bzw. die Verbindung der Tragschienen über Kreuz
Mit dem Kreuzverbinder werden die waagrechte und senkrechte Tragschiene der PV-Unterkonstruktion kreuzweise miteinander verbunden um gegenüber der Montage der PV Module nur auf waagrechten Tragschienen eine stabilere Konstruktion zu erhalten.
Bitte beachten Sie, dass es sich um keine Entwicklung eines Herstellers handelt und die Passgenauigkeit unter Umständen nicht der des Originalteils entspricht. Achten Sie zudem beim Druck auf einen richtig kalibrierten Drucker. Abweichungen können die Passgenauigkeit beeinträchtigen. Ferner handelt es sich bei 3D-gedruckten Teilen nicht um bauaufsichtlich zugelassene Bauteile, die die notwendige Stabilität und Festigkeit bei der Montage einer PV Anlage sicherstellen.
Grundsätzlich wird wegen mangelnder Festigkeit keine Fertigung im 3D-Druck für den konkreten Verwendungszweck empfohlen. Soll jedoch gedruckt werden, ist ein sehr robustes, uv- und witterungsbeständiges Material wie ASA-CF oder ASA-GF zu wählen. Das Infill muss bei 100% liegen, da es sich um ein stark beanspruchtes Bauteil handelt.
Vorrangig sollte ein anderes CAM-Fertigungsverfahren wie CNC-Fräsen oder Laserschneiden gewählt werden. Alternativ wäre auch ein 3D-Druck in Metall durch SLS oder ein Druck mit Ultrafuse-Filament und anschließendem Sintern denkbar, um das Teil aus Metall zu erhalten. Dabei bitte beachten, das Teil gemäß den Vorgaben des Herstellers etwas zu skalieren, da es dabei prozessbedingt etwas schrumpft.
Cross connector for mounting PV solar photovoltaic substructures or for connecting the mounting rails crosswise
The cross connectors connect the horizontal and vertical mounting rails of the PV substructure crosswise to create a more stable structure compared to mounting the PV modules on horizontal rails only.
Please note that this is not a manufacturer's product and the fit may not match that of the original part. When printing, ensure your printer is properly calibrated. Deviations can affect the fit. Furthermore, 3D-printed parts are not building code-approved components that guarantee the necessary stability and strength for PV system installation.
Generally, 3D printing is not recommended for this specific application due to insufficient strength. However, if printing is necessary, a very robust, UV- and weather-resistant material such as ASA-CF or ASA-GF should be selected. The infill must be 100%, as this is a component subject to high stress.
A different CAM manufacturing process, such as CNC milling or laser cutting, should be chosen as a priority. Alternatively, 3D printing in metal using SLS or printing with Ultrafuse filament followed by sintering would also be conceivable to obtain the part in metal. Please note that the part will shrink slightly due to process limitations and should be scaled according to the manufacturer's specifications.