Züca sports Balloon artists pump managing system (Borosino B271)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a ZUCA sport mountable, customizable organizer for balloon artist
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 157
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Züca sports Balloon artists pump managing system (Borosino B271)
Based on the fantasic design from 5D3D I was inspired to use this as a base for my linetwisting setup. I use a zuca sport, I do have a balloon bag placed on top of it and I do have a battery ballonpump by borosino (B271).
Now all of this tools can be neatly organised in handy customable setup. Attached to the collapsable zuca handle, you can now mount a organizer. This organizer holds the ballon pump and up to three addtional storage boxes (e.g. for your markers or buiness cards). Those items can easily be mounted and unmounted, so you can store the items in the zuca compartment. The boxes were desigend to hold markers like edding, pilot or sharpie. The organizer places the pump right above your balloons und a comfotable working height.
What do you need to print:
The basement: The zuca handle mount (by 5D3D)
The organizer ist mounted to this base - I used the following parts from this design:
obj_2_Body1
obj_3_Assembly
obj_4_Assembly
Note: I used the "Zuca+Bag+Cup+Holder+(Default+Tolerance)"-files. Please refere to the instructions by 5D3D
Print this parts and assemble them as described by 5D3D. I gently hammerer "obj_3" and "oby_4" into "obj_3"... a press fitting.
When you have printed this zuca handel mount you have to choose from one of this options:
pumpholder cups
All pumpholder cup are directly connected to the zuca handle, they come in different variations by how many interfaces are included on cup to mount storage/items to it. The items are slide via their connector rail onto the cup interface. The items should be attached/detached easily, on order to deconstruct the organisator into smaller units for storage.
following pumpholder cup variations a available:
Zuca_pumpholder_no interface: no interface, no item can be attached
Zuca_pumholder_1xinterface: one item can be attached in front of the cup, facing the artist
Zuca_pumholder_2xinterface: two items can be attached on the left and right side of the cup
Zuca_pumholder_3xinterface: three items can be attached on the left, right side and in front of the cup
comes in 3 flavors: No tolerance, 0.1mm tolerance (my favourite), 0.2mm tolerance (loose fit, use a onesided textile felt tape to get a good fit
storage boxes
The boxes were basically designed to hold marker (edding, pilot makers, sharpies) for the paint work.
following storage boxes are available:
boxes with one compartment (designed for holding eddings, pilots, sharpies...)
--> h100mm x w25mm, h73mm x w25mm (special size for buisness cards), h50mm x w25boxes with three compartments (holding up to three markers)
-->h100mm x w25mm, h50mm x w25double boxes (designed for holding eddings, pilots, sharpies...)
--> -->h100mm x w25mm
Optional: connector plate
the idea behind this item was to provide a easy/quick option to use this connector in a different desgin or simply glue it to an existing item, you want to use.
following plates are available:
Zuca_pumpholder_connectorplate_female_50
--> the 'prototype' h50mm with a 1mm wall thickness.
--> Be aware that you have to ensure, that grooved area of the part is always at the bottom
--> I glued this plate onto a sticker dispenser. No I can mount this dispenser onto my zuca setupZuca_pumpholder_connector plate for no interface
A very special part, so if you have choosen to print the pump holder with no interface and you do regret it afterwords... this is an extentions, which slides on top and you have now one interface.
I hope you will use for this in your linework - and always remember "sharing is caring".