HEMA Indoor Sabre Trainer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple 3D-printable HEMA saber trainer. Affordable, modular, and built with common hardware.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 343
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
HEMA Indoor Sabre Trainer
This sabre trainer is ideal for solo drills and slower partner drills. The construction is simple and secure: the wooden rod forms the blade, with a 3D printed handle and guard.
You’ll Need:
~1 meter long, 20 mm thick wooden rod
3D-printed handle components
2 small nails (to secure the guard)
1 screw (to lock the pommel in place)
PVA glue or similar (to secure the grip and prevent rattling) - not necessary
Assembly Notes:
Insert the wooden rod into the printed grip and apply glue inside to eliminate any movement or rattling
Attach the guard and secure it firmly using two small nails
Fix the pommel at the end of the handle with a screw to lock the entire assembly together
Print Settings:
Material: PETG or stronger
Nozzle: 0.4 mm or larger
Layer height: 0.2 mm
Perimeters: 4
Infill: 25%
The Tip cap can be printed in a soft TPU.