AT04 mounting socket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounting socket to flat mount an AT04-type connector to a through-hole in a plate (e.g, dashboard).
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 24
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
This is a through-hole style mount for an Amphenol AT04-type connector (tested with AT04-2P). A backface mounting ring is also included in the print files, although usually not required especially if using washers for the mounting bolts.
Designed for 5x M3 bolts to flat-mount, with the connector passing through a pre-drilled hole (approx 18 mm diameter). 5x mounting bolts is probably overkill and 3x would be fine.
I used this to mount a connector for the horn on my '99 Wrangler when converting to a aftermarket removable steering wheel.
Printed a on a Prusa 3 Mini with PLA.