1 / 7
Battery Cartridge for Taylor Guitars' ES-B 1.1 preamp — zdjęcie 1
1 / 7

Battery Cartridge for Taylor Guitars' ES-B 1.1 preamp

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

3D-printable version of Taylor Guitars' Battery Cartridge (part 83982) compatible with their ES-B 1.1 preamp.

Ocena
0 / 5
Polubienia
0
Pobrania
13
Wydruki
0
Wyświetlenia
53
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Music
Licencja
Creative Commons — Attribution — Noncommercial

This is a 3D-printable version of Taylor Guitars' Battery Cartridge (Taylor SKU: 83982) and is compatible with their ES-B 1.1 preamp. It holds two CR2032 batteries, and has a minus symbol on the bottom surface (where the negative side of the battery will be when inserted into the guitar). Make sure you print this model with the minus symbol facing up.

This part prints easily without supports and usually finishes printing in under 15 minutes, costing no more than a few pennies in material.

If you print it and find it's a little tight in your guitar, try shrinking it in your slicer by a few percent.

It's not a 1:1 recreation, as the OEM part was designed for injection-molding. So I've redesigned the thinner parts of the model to have more strength when 3D printed.

In the photos showing two clips, the OEM part is on the left and my version is on the right.

Tagi