Baymesh Cavity Filter Mounts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A series of simple mounting brackets for Nullrouten's Baymesh cavity filters.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 386
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
These are a series of mounts for nullrouten's baymesh cavity filters and various meshcore / meshtastic nodes for clean, simple mounting options. Each mount is designed to use low-loss patch cables and keep them as short as possible.
Available mounts:
Baymesh3 + Station G3
Baymesh3 + Station G2
Baymesh3 + Raspberry Pi 'standard' (3, 4, and 5 or other BCM with the same mounting pattern like a Femtofox).
Baymesh3 + Raspberry Pi 'standard' and Nullhop MeshToad v3 sidecar (needs mounting bracket and bracket printed)
Todo:
Baymesh3 standalone
Baymesh5 standalone
Baymesh3 + SolarXiao
Baymesh3 + Rak 1W
Baymesh3 + LuckFox Lyra Ultra
Note: mounting tabs and bm3 are m3 screws and top mount bosses are threaded for m2.5
These mounts were test printed on a creality k1c with PLA+ (indoor) or ASA (outdoor) with 0.20mm print height, supports enabled (normal), and standard orientation (bottom of mount on the print plate).