Dosing Funnel for Sage / Breville Coffee Basket Portafilter (Remix)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dosing funnel for the Sage/Breville Coffee portafilter with 54 mm designed coffee grinder.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 128
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A funnel designed for the Sage/ Breville 54mm diameter portafilter. It allows grinding coffee directly into the portafilter without spilling it. A distributer and a tamper fits in the tunnel of the funnel from the top. It is still possible to level, if the temper is used with little pressure only before removing the funnel.
I've printed the part in PLA with the top side down. Support is necessary. I recomment to use "snug" support type on the inside and making the gaps for the infill not to narrow to the top and bottom surfaces to avoid that the support does not stick too strong to the part itself.
If you have any comments, suggestions or similar, you are welcome to contact me.