ROK Espresso Portafilter Funnel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Don't make a mess-presso. Use this funnel that locks on to your portafilter.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 31
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
Lock and Load
I needed a funnel that would lock onto my portafilter so I could load and tamp coffee without such a mess. I like to settle the espresso by tapping the portafilter. I had to hold my old funnel in place using two hands. No more!
Print Guidelines
Print upside down (the project file already has you covered).
Use a food safe plastic. Prusa recommends PET-G.
The project file is configured for a 0.8mm nozzle, so make sure you change to whatever you're using (usually 0.4mm).
The project file also includes a little bit of support material in the flange lock. Use flush cutters to remove it. If you figure out a way to generate organic supports from the build plate, please let me know, but I think it will require another revision of the part.