Bosch GAS 18V-10L replacement pipes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pipes for Bosch Professional vacuum that are stronger than original part.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 109
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Replacement pipe for Bosch Professional GAS 18V-10L. The original pipes are horrible, made out of the cheapest plastic that snaps when you squeeze them with your hand. The replacements fit perfectly, but original floor vacuuming attachment may not fit it, I will work on an adapter to make it work with these pipes. Most of the hardware still works fine.
Choose multiple colours, original black, themed blue or even "RGB" like I did with transparent PETG. Don't bother with PLA. The 300mm height printer is required. Print only in vase mode. Set the line width (outer wall) to 1mm to match the original dimensions (I printed it with 0.4mm nozzle). 0.3mm layer works best to get highest clarity of the print. Use outer brim. If weird artifacts at the bottom occur, try setting the seam gap to 5000% like I did. There is preset 3MF file below to help you with the settings.