Lego Microfighters Hex Wall Display
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hang Lego MicroFighters as a wall display
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 65
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution
Inspired by some other wall mounts for collectibles I wanted a dynamic way to display my collection of Lego Star Wars MicroFighters.
Print Instructions
No supports
No raft
Tested in PETG, 0.4mm nozzle, “0.2mm speed”, Mk4 (see .3mf)
Construction Instructions
Print 2 tabs per connecting edge.
The more connecting edges the stronger the overall shape will be.
These tabs were tight on my setup, but may need to be scaled depending on your printer.
Recommend a bit of glue on each tab if you are unsure about the tightness of the tab fit.
Some models may need extra Lego bricks to connect to the base plates
Be creative on your layout!
Print enough hangers to support it on the wall and use good wall anchors. This creates fairly heavy wall art.
My wall has ~48 MicroFighters and 3 anchors.
Credit
I built this from scratch in OpenSCAD and used this Lego compatible SCAD library: https://github.com/cfinke/LEGO.scad