Grinchester - Shrub Vulture Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quality-of-Life remix of MrHeathPants' Vulture, improving printability and function!
- Ocena
- 5 / 5
- Polubienia
- 54
- Pobrania
- 166
- Wydruki
- 2
- Wyświetlenia
- 1552
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SUMMARY
Howdy folks! Meet Grinchester, a quality-of-life remix of the Vulture by MrHeathPants. The main focus was printability tweaks and converting from heat set inserts to M3 nuts. I also made small changes to part tolerances and overall function, making the blaster feel smooth and consistent!
Has all the same hardware as the Vulture, prints and assembles identically! Only major change is substituting M3 nuts for heat sets.
PRINTING
Parts should be printed strong, 4 walls and 10 top/bottom layers. Parts print in the same orientation as the original Vulture. Add supports where necessary, but some of areas can bridge without needing supports.
FULL CHANGELOG
- Tightened the Grip area at the Stock. Better printability, and mostly compatible with SMILEY stocks. They slightly obstruct the Plunger tho, easily fixed with a file.
- Revised all heat set inserts to M3 nuts.
- Added a solid layer to all overhanging counterbores, for printability.
- Added a 40mm screw to the Ram.
- Streamlined Ram airflow, with a wider inlet.
- Chamfering pass. If you ask me where I will scream.
- Improved Handguard printability, and shortened it slightly.
- Improved Trigger Group printability.
- Improved Follower printability.
- Tweaked tolerances between the Grip and Receiver to reduce clamping on the Lever.
- Put the SMILEY pusher on the Bolt. Extended the Breech forward a lil further.
- Added logo medallions to grip
- Added name to Upper Cover
- Cleaned up the mag cap
** NOTE: though the pictures show a straight lever, the files provided are for a standard curved lever. If you want a straight lever, you will have to get it custom made from a service like SendCutSend. Contact me for straight lever model files.
SHOUT-OUTS
A big thank you to all of these lovely people, in no particular order: MrHeathPants, Bird!, Leedle, Je, leafy.sunrise, thunderwizzle, Banshee, Netrunner, Takedownviable, Muffinbat, TuskZ, Rotary20, Luke, Perry, Luchathor, DrFlux, Out Of Darts, and particularly my lovely fiancéee for putting up with loud blaster noises 🥰
CHANGELOG
2026.07.29: added STL and 3MF version.