West System 105 Epoxy Dispensing Station Organizer Caddy with Drip Catcher and Built in Mixing Tray/Cup Holder

My favorite brand of epoxy is West System 105 because of their awesome metering pumps and long shelf life (5+ years even after opening), so I have designed this organizer to hold the quart-sized kit of resin and hardener. In addition, there are spaces for holding 2 oz sample cups, dosing and mixing trays, as well as stir sticks and other accessories.

The 2 oz cups are great for mixing larger amounts of resin (one pump of resin and hardener is 0.8 oz, so they can comfortably hold two pumps). For those times when you need just a little bit of epoxy, I have included a holder for Magmabow's mixing trays with my own custom debossed dosing guide so you can accurately achieve the 5:1 mix ratio without using a scale. For more details see my model page: 

Finally, I have positioned the 2 oz cups and mixing trays so that any drips from the hardener or resin will be caught by them instead of landing on your workspace. The dosing pumps are generally pretty good about avoiding drips, so this will be one or two drops at most. There is no need to discard the cup or tray the drips land on because I find they will mix easily into the next batch of epoxy (even after sitting out for months).

Note: This holder will fit the most common 205 Fast or 206 Slow hardener that comes in the round can for the 1-quart kits. It will not fit the 209 Extra Slow Cure or 207 Special Clear Fabric hardener that comes in the rectangular oblong can.

Print Settings: 0.2mm layer height, 2 walls and 15% infill is sufficient, but 4 walls will result in stronger 100% solid walls. Printing with 5 bottom and 5 top layers is recommended to save time, since it removes the time consuming process of bridging over a single layer of infill.