12MM Rod - Low Profile Clamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Upgrading the 8mm rods on my "Anet A8" (Very few original parts left) to 12mm for the Y axis. Wanted to keep the clamp…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 70
- Wydruki
- 0
- Wyświetlenia
- 539
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Upgrading the 8mm rods on my "Anet A8" (Very few original parts left) to 12mm for the Y axis. Wanted to keep the clamp as low as possible to minimize Z height loss.
The centerline of the rod is 9.3MM above the surface of the 2020 extrusion.
This is sized for M5 screws to clamp to the extrusion and an M3x16 cap head screw and captured nut for the clamping.
Print Settings
Printer:
Geeetech A20M (Originally)
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2
Infill:
30
Filament:
Novamaker ABS
Orange
Notes:
I am using ABS as this is used in a heated build camber.
Category: 3D Printer Parts